The VICI DBS ® PG Plus Rack combines the reliability of the hydrogen generator with a zero air generator into a 19” rack. The generator can be installed in any suitable 19” static or mobile cabinet. This simple but effective instrument can supply all your FID gas requirements. Designed as a hazard free alternative to high pressure cylinders, all that is required is deionized water, compressed air and a standard electrical supply for weeks of continuous operation.

Utilizing the VICI DBS proprietary prepared field proven PEM (Proton Exchange Membrane) incorporated inside a 100% titanium cell provides superior generator performance and cell life. The unique high pressure permeation membrane drying system eliminates the requirement for desiccant cartridges along with the associated downtime and cost. Innovative software control allows unrivaled operational performance and safety as well as the additional options of auto water feed, remote networking and cascading for built in redundancy. With a maximum output capacity of 600 mL/min, one generator can supply up to 14 FIDs. The compact design allows the generator to be installed directly in the laboratory eliminating the requirement for long gas lines and guaranteeing the delivery of high purity gas to your instrument.

A sophisticated control system connected to an easy to use touch screen continuously monitors vital operating parameters to ensure a safe and consistent performance. Built in sensors will shut the generator down if internal/external leaks are present, contaminated water, low water or over pressure. This is why the VICI DBS generators meet the strict safety guidelines to be certified for CE, FCC and MET (CSA and UL compliant).

Compressed air is prefiltered to 5 micron and then purified using a state of the art combined heated catalyst module. The resultant air is free from total hydrocarbons to <0.1 ppm, making it ideal for all FID applications. These levels guarantee a low signal to noise ratio, ensuring a flat and stable baseline.

FEATURES

▪︎ Produces a continuous supply of hydrogen & zero air
▪︎ 19” rack housing
▪︎ On-demand supply 24/7
▪︎ H2 Flow rate: 100 to 600 mL/min - zero air flow rates up to 5 L/min
▪︎ H2 Purity: +99.9996% zero air purity, 0.1 ppm of hydrocarbons
▪︎ Pressure: 11 barg (160 psig)
▪︎ Proprietary 100% titanium cell technology Unique 
▪︎ nique permeation membrane drying system
▪︎ USB connectivity 
▪︎ Easy to install, operate and maintain

Benefits

▪︎ Eliminates dangerous high pressure cylinders helping to keep your employees safer
▪︎ Ideal for all 19”cabinet applications
▪︎ Removes the logistics, inconvenience, downtime and costs of a cylinder system
▪︎ Flow capacity to match your specific instrument demands
▪︎ Ideal for all GC detector applications
▪︎ Meet and exceeds the requirements for the most demanding GC applications
▪︎ Superior hydrogen production with reliable long life cell  
▪︎ Minimal maintenance - no desiccant cartridges to change
▪︎ PC monitoring for maintenance, diagnostics and remote connection
▪︎ Peace of mind 
▪︎ Improve your laboratory work flow and productivity

Applications

ANALYZER APPLICATIONS

▪︎ Process GC analyzers detector fuel, oxidant gas
▪︎ Emissions test analyzers fuel gas, oxidant gas
▪︎ Stack gas analyzers fuel gas, oxidant gas

OTHER LAB APPLICATIONS

▪︎ On-board gas supply for mobile laboratories

Options

▪︎ Zero air option 1.8 L/min or 5 L/min
▪︎ I/O board
▪︎ Remote control software (RS232 or USB)
▪︎ Cascading hardware (standard or high purity)
▪︎ H2 senso
▪︎ Refill valve - replacing inlet pump (for H2O pressurized lines)
▪︎ Refill station (water tank) 3U or 2U
▪︎ Rack enclosure

Technical specifications

Models & Specs PG PLUS 100 Rack PG PLUS 160 Rack  PG PLUS 250 Rack PG PLUS 300 RACK PG PLUS 500 Rack  PG PLUS 600 Rack
Flow mL/min 100 160 250 300 500 600
Purity +99.9996%
Dew point at 7 barg (100 psig) -25 °C (-77 °F)
Outlet pressure barg (psig)  0.5 to 11 (7 to 160)
Technology PEM (Proton Exchange Membrane) - 100% Titanium cell
Drying system Regenerative Permeation Membrane
Deionized water quality Minimum < 1 micro S/cm @25ºC - 1 Mohm-cm@25ºC - ASTM II Recommended < 0.2 microS/cm @25ºC - 5 Mohm-cm @25ºC - ASTM II
Internal water tank (liters) External 10 liter bottle and internal pump
Safety Automatic shut down - internal/external hydrogen leak, overpressure and low water
Display Touch screen with operating parameters, system status and safety alarms
LED indicators Power on/off, system ready, errors
Interface USB mod A
Electrical supply 110-120V 60Hz / 220-240V 50Hz
Power consumption (watts) 65 95  115  130  180  280
Dimensions mm (inches) 19” rack W x 3U H x 500D (19.6)
Weight kg (lbs) 17 (37.4) 19 (41.9)
Shipping dimensions mm (in) 720W x 375H x 565D (28.3W x 14.7H x 22.2D)
Shipping weight kg (lbs) 21 (46) 23 (50) 
Operating temp °C (°F) 15 to 35 (59 to 95)
Outlet connection 1/8" Compression
Certification CE, FCC, MET (UL and CSA compliant)
 Options:
Auto water refill Continuous water feed from an external water supply
External water tank 19” rack 5 liter (2U) or 10 liter (3U) tank
Cascading Up to 10 units – built in redundancy for guaranteed up-time
Interface RS232/RS485, external contacts, PC control and intranet
Zero Air module 1.8 or 5 L/min
Information request
Need more information about this product?

Jusistraße 9
72581 Dettingen
Germany

Tel.: 07123/889750
Fax: 07123/889749
Diese E-Mail-Adresse ist vor Spambots geschützt! Zur Anzeige muss JavaScript eingeschaltet sein!

Authorized Distributor